Robot waterjet cutting is to fix the cutting head on the manipulator, which belongs to six axis waterjet cutting, generally used in cutting automotive interior parts, of course, in other multi-angle cutting industry also use robot waterjet cutting, plane waterjet cutting and plane 3D waterjet cutting is the traditional platform cutting. With the development of technology, the current platform cutting can achieve the cutting of uneven parts, with Angle cutting, generally used in tile parquet, welding angle cutting and so on.

From this you can determine the type of device you need.

Choose according to the largest part size you need to cut. En general, the effective stroke length and width of waterjet cutting are greater than 0.5m of the cutting material, which is a reasonable calculation.

The factory standard Z-axis stroke is 200mm. Because the thickness limit of waterjte cutting is about 200mm when the pressure is 52000psi, the standard is 200mm. The travel between 0 and 200mm can be adjusted at will. If you need more than 200mm travel, por favor contáctenos.

From this you can select the Z-axis travel.

We produce different models of waterjet cutting intensifier pumps. Basically, we can judge which intensifier pump is more suitable for you from the following indicators:

1: The waterjet cutting pressure is 60k and 90k

2: Waterjet cutting intensifier pump has double supercharger and single supercharger

3: Waterjet cutting intensifier pump flow is 3.8L/min 5.8L/min 7.6L/min, etc.

The basic waterjet cutting intensifier pump price is very cheap, the configuration is basic 60k psi, single supercharger, flow 3.8L/min. The complete set of equipment equipped with this intensifier pump is very cheap, other more intensifier pumps need to be decided according to your cutting process and requirements. If you have more questions, please consult us.

2015 AC 5-axis waterjet cutting machine price: $30,000

3020 AC 5-axis waterjet cutting machine price: $35,000

Please contact us for more price of waterjet cutting machine.

The structure of waterjet cutting machine is generally divided into two types:

1: gantry type waterjet cutting machine: gantry type waterjet cutting machine is placed before and after the material, because there is support on both sides.

2: Cantilever waterjet cutting machine: cantilever waterjet cutting machine can be placed on three sides of the material, while the water tank and running track is separated.

From this you can select the waterjet cutting machine structure you need.

En general, cutting plane plate, 3 axis and AB five axis waterjet cutting machine does not need to add height measurement function, which is from the perspective of cost performance. But AC 5-axis waterjet cutting machine need to add height function, because AC 5-axis waterjet cutting machine swing angle is relatively large, no height will produce a large error, cutting uneven plate, three axis, AB 5-axis, AC 5-axis need to add height function, in order to obtain accurate cutting precision.

From this you can select the waterjet cutting function you need.

Waterjet cutting machine is the use of leading screw and slider with servo motor to move, waterjet cutting machine tool itself running accuracy can reach ±0.01mm, which is based on the control of the servo motor, cutting accuracy ±0.1mm is based on the thickness of the water column and abrasive quality and other factors.

From the pressure, waterjet cutting intensifier pumps can be divided into two categories: 60,000psi and 90,000psi these two pressures. The result of the pressure comparison between the two waterjet cutting intensifier pumps is that the 90,000psi intensifier pump is 1.5 times as efficient as the 60,000psi intensifier pump, which means that the cost savings will be in half.