2015AC5A waterjet cutting machine is suitable for cutting rock plate. Machine tool length 2000mm, width 3100mm, weight 2560kg. AC 5-axis cutting head: infinite rotation, laser height measurement, automatically drying water, surface automatic cutting, cutting section angle ±68°. Products can be processed: rock plate basin, table facet, kitchen island, dining table, end table, and a variety of irregular patterns.

The AC 5-axis waterjet cutting machine of gantry structure consists of the following seven units:

1. 1. 2015 Cutting Table
   2. Waterjet Cutting Intensifier Pump WW5060
   3. Waterjet Cutting Control System
   4. Automatic Abrasive Feeder Tank
   5. Cooling System
   6. Water FiltrationSystem
   7. Automatic Abrasive Removal System

Part I: 2015AC5A Waterjet Cutting Table

• Oil-immersed structure, lead screw and slide immersed in lubricating oil which are fully lubricated, longer use time, higher accuracy
• Fully enclosed stainless steel protective cover effectively prevents abrasive and water from entering the running track and protects the life of the lead screw and slider
• Double limit design, preventing machine tools from collision due to misoperation, safety factor of machine tools is improved
• Thick lead screw and large slider can make the machine tool run at high speed without jitter
• The control system, servo motor, driver and signal line all use the brand of WEIHONG, which enhances the overall compatibility and makes the machine more stable
• Use flexible towing chain, preventing aging, prevent freezing and cracking; fireproof material, ensuring the long use of towing chain
• The water tank uses 5mm thick steel to ensure the overall strength of the frame
• Double Y structure, adjustable precision, not subject to geographical restrictions, can be installed in any environment
• Manual adjustment of abrasive feeder tank, stable work, no failure
• Standard AC 5-axis cutting head for indefinite rotation

Standard models of cutting table are: 2015, 3015, 3020, 4020, lsp. Other sizes can be customized.

Part II: Waterjet Cutting Intensifier Pump WW5060 PUMP

Types of waterjet cutting intensifier pump: 90,000PSI PUMP, SL-VI 100HP PUMP, SL-VI50JP PUMP, WW60JET PUMP, JET50 PUMP, WW40JET PUMP, WW5060JET PUMP. The choice of intensifier pump is based on the cutting material and application. You can consult us for more information, we will give you better advice.

WW5060 waterjet cutting intensifier pump is a basic type of intensifier pump, and its market penetration is strong. It was actually produced in 1990 and has been used steadily ever since. It is widely used in metal cutting, stone cutting, glass cutting, rubber cutting and other industries, which is a basic universal waterjet cutting intensifier pump. This intensifier pump has a full protection structure with all metal protection, applicable to any conditions and site. Many customers directly choose this basic intensifier pump.

• International universal supercharger core, can be purchased in the local and any waterjet cutting accessories mall, the universality is very strong
• Full metal protection structure, suitable for various working conditions
• Reasonable design is conducive to fast maintenance and easy operation
• All water joints are made of stainless steel to prevent rust

• The core parts of the supercharger are imported from the United States to ensure durability
• Omron PLC, Schneider Electric, uses big brands of appliances to ensure circuit stability
• Japanese brand reversing valve, so that the machine reversing without delay, small sound, stable pressure
• Independent variable pump, to zero pressure waiting, low pressure start, high pressure operation, more energy saving
• Brand motor, can be used is used, not broken at present, motor with overload protection function
• Stainless steel secondary intensifier pump to prevent internal rust from causing damage to the high-pressure accessories of the intensifier pump
• Transparent triple water filter element, easy to observe the state of the filter element and replace in time
• Use imported high pressure pipe, can be used for more than one year
• Normal working pressure 50000psi, stable working, low failure rate
• Copper cooling device, good cooling effect, hydraulic seal protection
• Noise less than 70 decibels, to create a good environment for the factory
• Servo motor/stepper motor is optional
• Equipped with 1L accumulator to ensure the stability of cutting pressure
• Strong welded steel pipe frame, machine operation will not tremble
• Transparent cover design allows you to observe core dynamics at any time
• Automatic pressure relief function, the entire machine has automatic stop protection system

Part III: Waterjet Cutting Control System (WEIHONG Brand)

• Industrial-grade display, waterjet special software, gampang operate.
• Absolute encoder system, memory function after power failure.
• Simulation operation, pause and start at any time, continue to cut from any position and point.
• A more user-friendly and intelligent function has been added, which is the setting and reminder func-tionof the replacement cycle of consumable parts, so that you can use it without any worries.
• Brand: WEIHONG
• Industrial-grade display, waterjet special software, gampang operate.
• Simulation operation, pause and start at any time, continue to cut from any position and point.
• The core control units we use, such as drivers, servo motors, wires, computer cases, computer software and control cards, are all branded by WEIHONG. In order to ensure better compatibility of the whole system, we all adopt the professional waterjet cutting system of WEIHONG.
• Support drawing, typesetting and other functions

Part IV: Waterjet Cutting Abrasive Feeder Tank

• The auto abrasive delivery system continuously supplies abrasive to the abrasive regulator tank on the cutter head by the large abrasive tank.
• Without any electrical components, it is free of maintenance, zero defects.
• Reasonable design, make this large-capacity abrasive tank cut 8-10 hours without interruption.
• Large diameter flange at the bottom, easy to remove the debris.
• Permanent free maintenance, the system will never fail

• 200KGS Abrasive Feeder

  Wall Thickness: 4.5mm ( Explosion-proof)

  Air Pressure: 0.4-0.8Mpa

  

Part V: Waterjet Cutting Cooling System

As you know, the pump is driven by hydraulic oil for

intensifier work. Excessive hydraulic oil temperature

will seriously affect the service life of the metal parts

and sealing parts of the hydraulic part in the intensifi-

er pump.

Refrigerator Cooling with super cooling effect, internal

closed circulation system, more environmental health,

beautiful appearance, reliable performance.

This refrigerator is different from the refrigerators on the market. This refrigerator is the product produced by the manufacturer according to the technical requirements of WINWIN. The internal structure has been changed to make it more suitable for the temperature of the cooling waterjet cutting intensifier pump.

Part VI: Waterjet Cutting Water Filtration System

A certain amount of scale will be generated during the

use of waterjet cutting, and the scale will easily cause

the parts to wear, thereby increasing the failure rate.

This system can filter out particles, rereged, lsp. in

the water, and effectively remove calcium and magne-

sium ions in the water to prevent scale formation, thus

protecting the machine and prolonging the life of ma-

chine parts.

• Use a water filtration system to remove calcium and magnesium ions from water to prevent scaling.
• Good water quality will not only increase the life of the seal but also prolong the reliability and life of the nozzle, orifice,
• high pressure seal etc. resulting in more efficient cutting.

Part VII: Water Cutting Automatic Abrasive Removal System

After the waterjet has been used for a long time,

waste abrasive will accumulate in the water

sink. When it reaches a certain level, we need to

do the work of cleaning the waste abrasive, in

the traditional abrasive removal, we have to stop

the work of the cutting table and do manual

abrasive removal.

Saiki, with the mobile abrasive removal system,

we can remove abrasive without affecting nor-

mal cutting, and it is an automatic abrasive re-

moval system.

WATERJET FAQ：

• Determine your needs: Consider the types of materials you will be cutting, the thicknesses you will be cutting, and the level of accuracy and precision you require. This will help you determine the size, power, and capabilities you need in a waterjet machine.
• Research different brands and models: Look for reputable brands that offer high-quality machines with good customer support and service. Read reviews and compare specifications to find a machine that fits your needs and budget.
• Consider the cost: Waterjet machines can be quite expensive, so it’s important to consider the cost of the machine, as well as ongoing costs like maintenance, operasi, and consumables like abrasive materials.
• Look for training and support: Make sure the manufacturer offers training and support to help you learn how to operate and maintain the machine. This will help you get the most out of your investment and ensure the machine operates safely and efficiently.
• Choose the right cutting head: The cutting head is an important component of a waterjet machine, as it determines the type of cutting and precision you can achieve. Consider the type of material you will be cutting and the level of precision you require when selecting a cutting head.
• Consider the software: The software that comes with a waterjet machine can impact its usability and productivity. Look for software that is user-friendly and has features that meet your needs, such as CAD/CAM compatibility, automatic nesting, and simulation capabilities.
• Determine the level of automation you need: Some waterjet machines come with automated features like material handling, tool changing, and cutting path optimization.
• Consider the delivery time and installation process: Waterjet machines can take several weeks or months to manufacture and deliver. Check the delivery time and installation process to ensure that you have enough time and resources to prepare for the machine’s arrival.
• Look for safety features: Waterjet machines can be dangerous if not used properly. Look for machines that come with safety features such as interlocks, safety curtains, and emergency stop buttons to ensure that the machine operates safely.
• Consider the reputation of the manufacturer: Look for manufacturers with a good reputation for quality and customer service. Choose a manufacturer that offers good technical support, training, and service to ensure that you have access to the resources you need to operate and maintain your waterjet machine.
• Check for warranty and service agreements: Look for machines that come with a warranty or service agreement to protect your investment and ensure that any issues or maintenance needs are addressed quickly and efficiently.
• Consider the space and resources required: Waterjet machines require a significant amount of space and resources to operate, including a water source, power supply, and ventilation system.
• Consult with experts: If you’re unsure about which machine to purchase, hubungi kita，WINWIN WATERJET COMPANY