The following introduces a floor type loading system waterjet machine. This machine is suitable for marble slab cutting, metal plate cutting, rubber cutting, резка стекла, и т.п., which has characteristics such as automatically loading and unloading, надежный, labor saving, safe and convenient feeding.

The whole set of machine contains 6 units:

1. Waterjet Cutting Table
2. Waterjet Cutting Intensifier Pump
3. Waterjet Cutting Control System
4. Waterjet Cutting Cooling System
5. Waterjet Cutting Abrasive Feeder Tank
6. Water Cutting Abrasive Removal System

Part I: Waterjet Cutting Table with Floor Type Loading System

3-axis cantilever waterjet cutting machine, can effectively cut 0-180mm thick metal, 0-50mm thick glass, rubber and other materials. No heat or chemical reaction is generated during the cutting process. The machine with automatic loading and unloading material device, can free hands, cut any graphics without mold assistance, and can load and unload materials on three sides, which is safe and reliable.

Table Characteristics:

• Cantilever structure, can load and unload materials on three sides
• Floor type loading system, convenient loading and unloading materials
• Water tank and actuator are separated to ensure the long-term use
• X, Y and Z axis using servo motor, automatic operation, to ensure accuracy
• International general structure cutting head, simple and reliable, in which the water switch assembly service time is guaranteed
• Cantilever beam uses high hardness aluminum alloy profile, light weight, high hardness, can ensure the smooth operation
• Adopt double limit setting, hardware limit and software limit, reject machine collision
• Water tank material thickness of 6mm, to ensure strength, with a level of adjustment design not affected by the installation field
• Three times of paint spraying, one time of antirust paint, two times of surface paint, so that the machine tool will never rust
• Stainless steel protective cover, avoid the traditional soft moving protective cloth damage problem, stainless steel protective cover will never rust or be damaged
• Machine tool base stress treatment, avoid machine deformation problems after long time use
• The use of thick lead screw and large sliding block can ensure the stability of machine operation and cutting accuracy
• The use of frost-proof, fire-proof, anti-aging tow chain and cable ensures that the cable can be used for more than 20 годы
• Automatic lubrication system, regularly automatically offer lubricating oil to the lead screw and slider lubrication, reduce the wear of the lead screw and slider
• The machine is very well sealed and can work in harsh environment

Part II: Waterjet Cutting Intensifier Pump

There are many models of waterjet cutting intensifier pump: WW5060, JET50, SL-VI50, SL-VI100, SL-VI125, WW60JET. Customers need to choose a intensifier pump according to their own situation. Here we introduce a basic intensifier pump: JET60 intensifier pump, an entry level waterjet cutting intensifier pump, is used quite a lot by the market. After years of verification, the stability is recognized by the customer.

The intensifier pump is to pressurize the atmospheric water to 52000psi pressure, and then the water is sprayed out through the hole with a diameter of 0.3mm, mixing with the abrasive to cut. Поэтому, the table is the actuator, and the intensifier pump is the power mechanism. In the whole set of machine, intensifier pump is the core unit.

• JET50 intensifier pump, an international brand, is a general intensifier pump
• The core parts of the supercharger are imported from the United States to ensure durability
• Omron PLC, Schneider Electric, uses big brands of appliances to ensure circuit stability
• Japanese brand reversing valve, so that the machine reversing without delay, small sound, stable pressure
• Independent variable pump, to zero pressure waiting, low pressure start, high pressure operation, more energy saving
• Brand motor, can be used is used, not broken at present, motor with overload protection function
• Stainless steel secondary intensifier pump to prevent internal rust from causing damage to the high-pressure accessories of the intensifier pump
• Transparent triple water filter element, easy to observe the state of the filter element and replace in time
• Use imported high pressure pipe, can be used for more than one year
• Normal working pressure 50000psi, stable working, low failure rate
• Copper cooling device, good cooling effect, hydraulic seal protection
• Noise less than 70 decibels, to create a good environment for the factory
• Servo motor/stepper motor is optional
• Equipped with 1L accumulator to ensure the stability of cutting pressure
• Strong welded steel pipe frame, machine operation will not tremble
• Transparent cover design allows you to observe core dynamics at any time
• Automatic pressure relief function, the entire machine has automatic stop protection system

Part III: Waterjet Cutting Control System (WEIHONG Brand)

• Industrial-grade display, waterjet special software, прост в эксплуатации.
• Absolute encoder system, memory function after power failure.
• Simulation operation, pause and start at any time, continue to cut from any position and point.
• A more user-friendly and intelligent function has been added, which is the setting and reminder func-tionof the replacement cycle of consumable parts, so that you can use it without any worries.
• Brand: WEIHONG
• Industrial-grade display, waterjet special software, прост в эксплуатации.
• Simulation operation, pause and start at any time, continue to cut from any position and point.
• The core control units we use, such as drivers, servo motors, wires, computer cases, computer software and control cards, are all branded by WEIHONG. In order to ensure better compatibility of the whole system, we all adopt the professional waterjet cutting system of WEIHONG.
• Support drawing, typesetting and other functions

The core control units we use, such as drivers, servo motors, wires, computer cases, computer software and control cards, are all branded by WEIHONG. In order to ensure better compatibility of the whole system, we all adopt the professional waterjet cutting system of WEIHONG.

Part IV: Waterjet Cutting Абразивный Фeeder Тank

• The auto abrasive delivery system continuously supplies abrasive to the abrasive regulator tank on the cutter head by the large abrasive tank.
• Without any electrical components, it is free of maintenance, zero defects.
• Reasonable design, make this large-capacity abrasive tank cut 8-10 hours without interruption.
• Large diameter flange at the bottom, easy to remove the debris.
• Permanent free maintenance, the system will never fail

• 200KGS Abrasive Feeder

  Wall Thickness: 4.5мм ( Explosion-proof)

  Air Pressure: 0.4-0.8МПа

Part V: Waterjet Cutting Cooling System

As you know, the pump is driven by hydraulic oil for

intensifier work. Excessive hydraulic oil temperature

will seriously affect the service life of the metal parts

and sealing parts of the hydraulic part in the intensifi-

er pump.

Refrigerator Cooling with super cooling effect, internal

closed circulation system, more environmental health,

beautiful appearance, reliable performance.

This refrigerator is different from the refrigerators on the market. This refrigerator is the product produced by the manufacturer according to the technical requirements of WINWIN. The internal structure has been changed to make it more suitable for the temperature of the cooling waterjet cutting intensifier pump.

Part VI: Waterjet Cutting Water Filtration System

A certain amount of scale will be generated during the

use of waterjet cutting, and the scale will easily cause

the parts to wear, thereby increasing the failure rate.

This system can filter out particles, примеси, и т.д. in

the water, and effectively remove calcium and magne-

sium ions in the water to prevent scale formation, thus

protecting the machine and prolonging the life of ma-

chine parts.

• Use a water filtration system to remove calcium and magnesium ions from water to prevent scaling.
• Good water quality will not only increase the life of the seal but also prolong the reliability and life of the nozzle, orifice,
• high pressure seal etc. resulting in more efficient cutting.

Part VII: Water Cutting Automatic Абразивный Removal System

After the waterjet has been used for a long time,

waste abrasive will accumulate in the water

sink. When it reaches a certain level, we need to

do the work of cleaning the waste abrasive, in

the traditional abrasive removal, we have to stop

the work of the cutting table and do manual

abrasive removal.

В настоящее время, with the mobile abrasive removal system,

we can remove abrasive without affecting nor-

mal cutting, and it is an automatic abrasive re-

moval system.

Резюме: The above describes all units of a set of waterjet cutting machine, among which cooling system, water filtration system, abrasive removal system are optional units. Конечно, customers can also choose to buy locally, but it is recommended that customers choose to buy this unique cooling system. Here attached to you is the list of the complete set of waterjet cutting machine.

What can this waterjet cutting machine cut?

• Can cut tile to do tile parquet
• Can cut marble, table stitching process
• Metal cutting
• Rubber cutting, резка стекла, и т.д.